Fabrication
Auger attachment
- Product code:
- 2-AUGER
- Description:
- PD10 Digga auger drive unit
450mm DIA auger with replaceable teeth
Hosing c/w quick release couplings ready to connect to loader
Engineering certification
Compliance plate
Plant number fitted (if required)
- Variations:
- Available in QDS
Available in RAS
Cable / Belt reeler
- Product code:
- 2-REELER
- Description:
- Quick-detach of axle assembly for ease of operation
Guarded hydraulic gearbox and motor assembly
Plate gusset's for increased strength
Hydraulic quick-release couplings supplied
Engineer certified to SWL 4500kg belt / chain (with reel)
Compliance plate
Plant number fitter (if applicable)
- Variations:
- Available in QDS
Available in RAS
Cable boat
- Product code:
- 2-CABLEBOAT
- Description:
- Fork pockets (for surface handling)
Conveyor roller attached one end
Convey our belt used as bottom of boat to protect cable from damage
Fold-up step used as walkway platform (able to be used both sides - optional)
QDS overall dimensions 3025 x 1040 x 1320
Engineer certified
Compliance plate
Plant number fitted (if applicable)
- Variations:
- Available in QDS (advanced)
Available in RAS
Dimensions 3300 x 900 x 1110
Fork only available (standard)
Cribroom
- Product code:
- 2-CRIBROOM-756
2-CRIBROOM-779
- Description:
- Fork pockets (for surface handling)
All cupboards lockable
Storage area access through hinged seats
Storage areas for first-aid and other consumables
Esky and deputy station at back of pod (optional)
Side bumper-bars for protection from rib
padded seat
Foldable white board / corkboard
Stainless table tops
Engineer certified
Compliance plate
Plant number fitted (if applicable)
- Variations:
- 756 - with deputy station
Available in QDS
Available in RAS
Duckbill pod
- Product code:
- 2-DUCKBILL
- Description:
- Internal dimensions 2.5m x 2.5m (standard)
SWL 3, 4 or 5 tonne
6mm checker-plate flooring
Side tie downs
500mm high sides
Engineering certification including stability calculations
- Variations:
- Available in QDS
Available in RAS
Hand rails and gate kit
Sized to suit client
Emergency pod
- Product code:
- 2-POD-EMERGENCY
- Description:
- Suitable EIMCO 913, 913-6, 130 or greater
SWL 1 tonne
Tare 1690kg
Storage areas for emergency equipment and timbers
Engineering certification
Compliance plate
Plant number fitted (if required)
- Variations:
- Available in QDS
Available in RAS
Ejector bucket
- Product code:
- 2-BUCKET
2-BUCKET-EJECT
- Description:
- Overall bucket width is 2.5m
Capacity: 3.0m3
Pivoting ejector plate for expelling material (eg concrete, ballast, etc)
All hydraulic hosing (including quick release couplings)
Bisalloy front cutting edge - 40mm thick
Bisalloy side cutting edges
Engineer certified to suit EIMCO 130LHD and 220LHD tare 3.0 tonne
SWL 6.0 tonne with foam filled tyres
SWL 4.5 tonne with standard tyres
Compliance plate
Your plant number
- Variations:
- Option of teeth of front cutting edge: caterpillar 'K' series twist lock teeth
4.0m3 ejector bucket
Flat edged bucket
Toothed bucket
Non eject also available
Available in QDS
Available in RAS
Extendable jib
- Product code:
- 2-JIB-EXTEND
2-JIB-EXTEND-SLEW
- Description:
- Overall dimensions: 3550 x 1675 x 1050
Designed to SWL at two different points
SWL - mast end (safety hood at end):
- 2.5 T retracted
- 1.5 T extended
SWL - QDS end (excavator hooks):
- 3.0 T retracted
- 2.2 T extended
2 x weld on excavator hooks for added lifting abilities
Designed for transport of mesh (4800 x 1200)
1220mm telescopic extension
Safety lifting hook hammer locked to end of jib
Engineer certified
Compliance plate
Plant number (if required)
- Variations:
- Telescopic
Telescopic chain hitch
Slewing version also available
Available in QDS
Available in RAS
Fitters pod
- Product code:
- 2-POD-FITTERS
- Description:
- Storage area for small and large fittings and components
All cupboards and doors can be lockable
6" offset vice fitted to workbench
Fold-down hose storage area on rear of pod
Side fork pockets for surface handling
Drainage points throughout pod
Full external side plates for protections against rib damage
Rud lugs for tie down
Engineer certified
Compliance plate fitted
Plant number's fitted (if applicable)
Checker-plate flooring
- Variations:
- Available in QDS
Available in RAS
Multiple designs available
Fork attachments
- Product code:
- 2-FORKS
- Description:
- Class IV fork tynes (1500 long)
Class V fork 10t (1525 long)
Compliance plate
Plant number (if applicable)
- Variations:
- 7T or 10T
10T - hydraulic hosing (including quick release couplings)
Extended fork pockets
Available in QDS
Available in RAS
Mancages
- Product code:
- 2-MANCAGE
- Description:
- SWL - 1500kg
SWL - 500kg on posts to support cable roller
Guarding
Fall arrest anchor point
Bolter mount points (in floor of basket)
Emergency brake valve
Escape ladder fitted
Bottom section adaptable for second storey
Grid-mesh flooring for easy cleanout
Dimensions 2.5m x 2.5m
2 x side access self-closing gates
Engineer certified
Compliance plate
Plant number (if required)
- Variations:
- 2nd storey
HT cable arm
Available in QDS
Available in RAS
Miner supply systems
- Product code:
- 2-CASSETTE
- Description:
- Bolt cassettes are designed to accommodate 30 metres of bolting consumables for road way development
Overall dimensions are 3125L x 550W x 375H
SWL of 1750kg (various designs to suit miner)
- Product code:
- 2-CASSETTE-CARRIER
- Description:
- Cassette carrier
Overall dimensions are 2450W x 3240L x 1370H
Designed for transport of 2 x loaded cassettes
Storage area for spare dollies, vent tube rubbers and chains, etc
Engineer certified to SWL 5000kg
- Product code:
- 2-JIB-EXTEND
- Description:
- Extendable jib
Overall dimensions are 3550W x 1675W x 1050H
(See generic jib specifications)
- Product code:
- 2-CASSETTE-RACKER
- Description:
- QDS cassette racker
Overall dimensions are 3400L x 1100W x 1250H
Hydraulic operated
All hydraulic components guarded (all guards removable for easy access)
Speed controls on both in and out directions of travel
Chain assembly c/w chain shortener
Heavy duty push/pull assembly
- Product code:
- 2-POD-MESH
- Description:
- QDS mesh carrier
QDS attachment
Engineer certified to SWL 3t
Internal width of 1650mm
SWL labels to indicate pod loading capacities
Compliance plate
75 x 75 6 RHS section along front of pod
Designed for transporting mesh modules
Mesh to overhand around 800mm - 1000mm
Tie down points
- Product code:
- 2-LIFTINGBEAM
- Description:
- H frame lifting beam
Designed to pickup and place roof mesh modules
4 x excavator hooks for pickup of mesh
1 x swivel starpoint eye bolt
Pipe trailer
- Product code:
- 2-TRAILER-PIPE
- Description:
- Overall dimensions 9250L x 2450W x 1850W
Capacity 52 x 6" pipes
Towed from both ends
Single axle, solid rubber "bearcat tyre and wheel assembly"
Towing hitch c/w safety chains
Designed for EIMCO 130 LHD, ED7 and ED10 (or equivalent)
One main operator control valve (typically the outbye end)
2 x independent telescopic / tilt lift arms
Strap lifter for pipes controlled with 2 x braked winches
Side access loading with forklift or crane
Storage area for pipe clamps, chains, manifolds, wing keels, etc.
All storage units removable for surface re stocking (c/w drainage holes)
Hydraulic hosing placed in manifold for ease of change out and hose protection
Engineer certified c/w stability calculations
Certification plate attached
Design risk assessment
Training package supplied and delivered (optional)
Onsite practical and theoretical assessments (optional)
Parts and service manual
Critical spares list
Main component change-out procedures
- Variations:
- Available in QDS
Available in RAS
Utility trailer
- Product code:
- 2-TRAILER-UTILITY
- Description:
- The following standards were referenced:
- AS3990 mechanical equipment - steelwork
- AS3751 underground mining - slope haulage
Trailer mass is 1900kg
Trailer capacity is 8000kg
Trailer ATM is 9900kg
Towing eye has an ATM of 44 tonnes
Label plate shows:
- Capacity 8 tonne for DBT 10C and EIMCO 130
- Capacity 6 tonnes EIMCO 913 LHD and 913-6 LHD (ATM kg, tare kg, ref CMP- 466)
SWL 8000kg on side of chassis 50mm letters
Rud lugs for tie down onto rolling stock 4 x 15t RBS
Rud lugs for tie down of transported equipment
Rud lugs for safety chain attachment
Solid rubber wheels - "bearcat tyres"
- Variations:
- 8 tonne link and lock trailer
Available in QDS
Available in RAS
Road salter
- Product code:
- 2-SALTER
- Description:
- Hot dipped galvanised mainframe
Stainless steel hopper and flinger assembly
Hydraulic operated
Engineer certified
Compliance plate
SWL 1000kg
Removable guards for easy cleanout and service
Adjustable feed rate for increased coverage
- Variations:
- Available in QDS
Available in RAS
Service, Oil and Diesel pods
- Product code:
- 2-POD-DIESEL
2-POD-SERVICE
- Description:
- Fork-pockets in base frame
Automatic air shut-off timer
Grease pump kit supplied
Air operated spear pumps on all tanks
All functions marked with brass nameplates
Oil storage area bunded for safety purposes
Designed for diesel, hydraulic, gear and engine oils
Volumes of tanks to be confirmed by client
Self-retracting hose reels on all tanks
Storage areas for fire extinguisher
All tanks are removable (for ease of service and repair)
Heavy duty side plates on pod to protect from damage
Engineer certified
Compliance plate
Plant number fitted (if applicable)
- Optional extras
- Automatic fire suppression
Optional air supply line
- Variations:
- Available in QDS
Available in RAS
Oil pods
Diesel pods
Service pods